|
Series
500
Moisture
Analyser |
 Illinois
Instruments offers a moisture analyser for almost any application
where trace moisture is measured in a gas stream. The Series
400 Moisture Analyser and Series 500
Moisture Analyser offer different sensor technologies to meet
your specific requirements. The Series 500 Moisture Analyser uses
a phosphorus pentoxide (P2O5) sensor for measuring moisture from 0 to 1000ppm.
The Series 400 Moisture Analyser uses an aluminum oxide (Al2O3) sensor
t to measure moisture from -90oC to +20oC in most industrial gas streams.
The moisture analyser can be configured
in a variety of ways to suit your specific application. It is available
as a benchtop/panel mountable cabinet, a NEMA 4X wall mount cabinet, or
in a 19 inch rack mountable cabinet.
The 500 Moisture Analyser can have an integral
sensor or use a remote mounted sensor in general purpose areas. The
400 Moisture Analyser can be equipped with an integral sensor, or you can
have a remote mounted sensor for either general purpose or hazardous areas.
Illinois Instruments'
Series 500 Moisture Analyser represents
our latest advancement in moisture analysis. This series was designed to
be customized to your application while providing a simple, yet affordable
analyzer. The Series 500 Moisture Analyser incorporates
microprocessor control with our high quality electrolytic moisture sensor
to bring flexibility to your process environment. These analyser provides
accurate depend-able results over a wide range from 0.1 ppm to 1000 ppm.
All
models feature microprocessor control for stable and repeatable operation.
A bright, autoranging LED display provides direct measurement output. User-adjustable
alarms, scaleable analog output signals, RS232 interfacing, and process
sample bypass flow systems are all optionally available.
Three
different configurations add to the base Model
510 (shown at right) to offer the choices
needed to satisfy virtually all industrial environment and operational
constraints.
 |
 |
 |
Model
510
can be
used on the bench
or
Panel Mounted. |
Model
520
is NEMA
4X / IP66
rated
for weatherproof
and
waterproof locations. |
Model
530
houses
one or two analysers
in
its 4U (19 inch)
rack
mount cabinet.
|
Features:
|
|
Autoranging
from 0.1 to 1000 ppm |
|
|
RS232/485
outputs |
|
|
ppmv,
°C, and °F units |
|
|
No
calibration required |
|
|
Remote
sensors available |
Applications:
|
|
Heat
Treating Furnaces |
|
|
Air
Dryers |
|
|
Compressed
Air |
|
|
Metallurgy |
|
|
Chemical
Manufacturing |
|
|
Plastics
Manufacturing |
|
|
Inert
Atmosphere Blanketing |
|
Johnsburg,
